AISI SAE 1020 Low Carbon Steel Coil
Get Latest PricePayment Type: | L/C,T/T,D/P,D/A,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 5 Ton |
Transportation: | Ocean,Land,Air,Express |
Payment Type: | L/C,T/T,D/P,D/A,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 5 Ton |
Transportation: | Ocean,Land,Air,Express |
Model No.: 1020 Low Carbon Steel Coil
Brand: CHANGYI
Standard: Aisi, Astm, Bs, Din, Gb, Jis
Place Of Origin: China
Species: Steel Coil, Steel Plate
Production Process: Hot Rolled, Cold Rolled
Special Steel: High-Strength Steel Plate
Tolerance: ±1%
Category: Cold Rolled Steel Sheet, Low-Alloy Plate, Boiler Vessel Plate, Ship Steel Plate, Hot Rolled Steel Sheet, Checkered Plate
Processing Service: Bending, Welding, Decoiling, Cutting, Punching
Selling Units | : | Ton |
Package Type | : | Standard Exporting Seaworthy Packing or According to Customer Demands |
PRODUCT DESCRIPTION
AISI SAE 1020 Low Carbon Steel Coil is a kind of Carbon Structural Steel coils.
1020 is a high-quality carbon structural steel. The strength of this steel is slightly higher than that of 1015 steel. It has good toughness, plasticity and weldability. It is rarely quenched and has no temper brittleness. Cold deformation has high plasticity, and is generally used for bending, calendering, bending and hammer arching. The welding performance of arc welding and contact welding is good. The thickness is small during gas welding, and cracks are prone to occur on parts with strict shape requirements or complex shapes. The machinability of the cold-drawn or normalized state is better than that of the annealed state, and it is often used to manufacture various mechanical parts with low force and high toughness requirements.
Corresponding grade:
GB: 20
JIS: S20C
ASTM: 1020
DIN: 1.1152
chemical composition
Carbon C: 0.17%~0.24%
Silicon Si: 0.17%~0.37%
Manganese Mn: 0.35%~0.65%
Sulfur S: ≤0.035%
Phosphorus P: ≤0.035%
Chromium Cr: ≤0.25%
Nickel Ni: ≤0.25%
Copper Cu: ≤0.25%
Mechanical properties:
Density ρ (kg/m3): about 7850
Tensile strength σb (MPa): ≥410
Yield strength σs (MPa): ≥245
Elongation δ5(%): ≥25
Reduction of area ψ(%): ≥55
Brinell hardness (HBS10/3000) (without heat treatment): ≦156
Product | Carbon Steel Sheet In Coil | |
Commodity | Cold Rolled Steel Coil | Hot Rolled Steel Coil |
Grade | Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12, ST13,ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06 | Q195,Q215A,Q215B,Q215AF,Q215BF,Q235A, Q235B,Q235C,Q235D,Q235BF,Q255A,Q255B,Q275A, Q275B, Q275C,Q275D,A36,GR36 ,20#, 45#, 10# ,T9,T12,JIS G3101 SS400,SS330,S235JR,S355JR, A992, A500, ASTM A283-B/A283C, ASTM A572 Gr50-B/A572 Gr42-B, ASTM A515 Gr70, ASTM A516 Gr70, EN10025-2:2004 S235JR-S355K2+N, EN10025-5:2004 S355J2W/S355K2W .etc. |
Standard | ISO,JIS,ASTM,AS EN | ISO,JIS,ASTM,AS EN |
Surface treatment | Chromated and oiled, and ant-finger | Chromated and oiled, and ant-finger |
Hardness | Softy, half hard ,hard quality | Softy, half hard ,hard quality |
Thickness | 0.12-200mm | 0.12-6mm |
Width | 600-1500mm | 600-1500mm |
Coil weight | 3-30MT/Coil or as your request | 3-30MT/Coil or as your request |
Packaging | Export standard, seaworthy | Export standard, seaworthy |
Transport Type | Container, bulk and train | Container, bulk and train |
PRODUCT DETAILS
Category | Grades | Standard |
Carbon structure steel | Q195, Q215, Q235, Q275 | GB/T700-2006 |
Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | GB/T1591-2008 |
Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | GB/T699-1999 |
Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo, 20Cr,40Cr,20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi, 20MnVB, 20MnTiB, 45MnV, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V | GB/T3077-1999 |
Spring Steel | 65Mn, 60Si2Mn, 50CrVA | GB/T1222-84 |
Bearing Steel | GCr15, GCr15GD,55SiMoV | GB/T18254-2002 |
Structural steels subject to end-quench hardenability requirements | 20CrMnTi, 30CrMnTi, 20Cr, 40Cr, 30CrMo, 42CrMoA, 27SiMn, 40Mn2H, 20CrNiMo, 40Mn2, q345b,35MnBM, 40MnB,45MnV. | GB/T5216-2004 |
Oil wells structural steel | 37Mn5, 36Mn2V | Q/LYS248-2007 |
Marine anchor chain steel | CM490, CM690, M30Mn2 | YB/T66-1987 |
GB/T18669-2002 |
PRODUCT DISPLAY
EXHIBITION OF COOPERATION
CERTIFICATION
FAQ
Q:Can I get samples before order ?
A:Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
Q:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept third party inspection.
Q:How do we trust your company?
A:We specialise in steel business for years, headquarter locates in Liaocheng, Shandong province, you are welcome to investigate in any ways, by all means, we have CE and ISO9001 certificate, quality can be guaranteed.Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.