ASTM A517 Carbon Steel Plate
Get Latest PricePayment Type: | L/C,T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 5 Ton |
Transportation: | Ocean,Land,Air,Express |
Payment Type: | L/C,T/T,Paypal |
Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
Min. Order: | 5 Ton |
Transportation: | Ocean,Land,Air,Express |
Model No.: Steel Plate
Brand: CHANGYI
Standard: Aisi, Astm, Bs, Din, Gb, Jis
Place Of Origin: China
Species: Steel Plate
Production Process: Hot Rolled, Cold Rolled
Application: Boiler Plate, Container Plate, Flange Plate, Ship Plate
Special Steel: High-Strength Steel Plate
Tolerance: ±1%
Category: Cold Rolled Steel Sheet, Hot Rolled Steel Sheet, Steel Plate, Boiler Vessel Plate, Ship Steel Plate, Low-Alloy Plate
Processing Service: Bending, Welding, Decoiling, Cutting, Punching
Selling Units | : | Ton |
Package Type | : | Standard Exporting Seaworthy Packing or According to Customer Demands |
PRODUCT DESCRIPTION
ASTM A517 Carbon Steel Plate.Carbon Steel Sheet is a kind of steel whose carbon content is less than 2.11% and does not specially participate in metal elements. It can also be called ordinary carbon steel or carbon steel. In addition to carbon, it also has a small amount of silicon, manganese, sulfur, phosphorus and other elements inside. The higher the carbon content, the better the hardness and strength will be, but the plasticity will be worse
advantage
1. After heat treatment, the hardness and wear resistance can be improved
2. Proper hardness and good machinability during annealing
3. Common production materials and low production cost
shortcoming
1. Poor thermal hardness. When used as tool material, when the temperature exceeds 220 ℃, the hardness and wear resistance will deteriorate.
2. Poor hardenability
classification
1. According to the purpose, it can be divided into structure, tool and free cutting structural steel
2. According to the smelting way, it can be divided into open hearth steel, converter steel and electric furnace steel
3. According to deoxidation route, it can be divided into boiling steel, killed steel, semi killed steel and special killed steel
PRODUCT DETAILS
Product | Carbon Steel Plate | |
Commodity | Cold Rolled Steel Plate | Hot rolled Steel Plate |
Grade | Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12, ST13,ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06 | Q195,Q215A,Q215B,Q215AF,Q215BF,Q235A, Q235B,Q235C,Q235D,Q235BF,Q255A,Q255B,Q275A, Q275B, Q275C,Q275D,A36,GR36 ,20#, 45#, 10# ,T9,T12,JIS G3101 SS400,SS330,S235JR,S355JR, A992, A500, ASTM A283-B/A283C, ASTM A572 Gr50-B/A572 Gr42-B, ASTM A515 Gr70, ASTM A516 Gr70, EN10025-2:2004 S235JR-S355K2+N, EN10025-5:2004 S355J2W/S355K2W .etc. |
Standard | ISO,JIS,ASTM,AS EN | ISO,JIS,ASTM,AS EN |
Surface treatment | Chromated and oiled, and ant-finger | Chromated and oiled, and ant-finger |
Hardness | Softy, half hard ,hard quality | Softy, half hard ,hard quality |
Thickness | 0.12-200mm or According to Requirement | 0.12-200mm or According to Requirement |
Width | 600mm-2500mm or According to Requirement | 600mm-2500mm or According to Requirement |
Length | 4000mm-12000mm or According to Requirement | 4000mm-12000mm or According to Requirement |
Category | Grades | Standard |
Carbon structure steel | Q195, Q215, Q235, Q275 | GB/T700-2006 |
Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | GB/T1591-2008 |
Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | GB/T699-1999 |
Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo, 20Cr,40Cr,20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi, 20MnVB, 20MnTiB, 45MnV, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V | GB/T3077-1999 |
Spring Steel | 65Mn, 60Si2Mn, 50CrVA | GB/T1222-84 |
Bearing Steel | GCr15, GCr15GD,55SiMoV | GB/T18254-2002 |
Structural steels subject to end-quench hardenability requirements | 20CrMnTi, 30CrMnTi, 20Cr, 40Cr, 30CrMo, 42CrMoA, 27SiMn, 40Mn2H, 20CrNiMo, 40Mn2, q345b,35MnBM, 40MnB,45MnV. | GB/T5216-2004 |
Oil wells structural steel | 37Mn5, 36Mn2V | Q/LYS248-2007 |
Marine anchor chain steel | CM490, CM690, M30Mn2 | YB/T66-1987 |
GB/T18669-2002 |
EXHIBITION OF COOPERATION
CERTIFICATION
FAQ
Q:Can I get samples before order ?
A:Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.Q:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept third party inspection.Q:How do we trust your company?
A:We specialise in steel business for years, headquarter locates in Liaocheng, Shandong province, you are welcome to investigate in any ways, by all means, we have CE and ISO9001 certificate, quality can be guaranteed.Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.